Power Points for Ashfield Homes

Quick to BookExtra points and replacements go on the schedule fast, not weeks away.
Backed for LifeEvery point we fit carries a lifetime workmanship guarantee.
Take $50 OffFirst-time customers save $50 on the job, and the quote itself never costs a cent.
600+ Five-Star ReviewsSydney homeowners rate our electrical work five stars, GPOs included.

What We Handle Under Power Points

Every house eventually runs short of somewhere to plug things in, and power points end up being one of our steadiest jobs because of it. From a single extra outlet to refitting a whole room, the scope covers:

  • New GPOs added to rooms that have run out
  • Faulty or dead point replacement, often the first sign of a deeper issue
  • USB and smart power points, built into the outlet rather than plugged in
  • Weatherproof outdoor points, for patios, garages and garden power
  • Double and single point swaps, matching the room's actual needs
  • Point relocation, moving an outlet to where furniture or a renovation now needs it

We fit premium hardware as standard, chosen for how it holds up over years of daily plugging and unplugging, not just how it looks on day one.

Electrician installing a wall power point

Six Signs Your Home Is Asking for Power Points

Household appliances have multiplied faster than most homes' outlets have. These are the tell-tale signs it's time to add or replace some.

  • You're running extension leads or power boards permanently in more than one room
  • A point has gone dead, loose, or only works at an angle
  • A socket feels warm or has visible scorch marks around the plug
  • You've renovated a room and the points are now in the wrong spot
  • You need outdoor power for a new patio, shed or garden setup
  • Your home office or entertainment area never has a free outlet left

A burnt outlet or an overloaded power point both start exactly this way, so it's worth acting before either gets worse.

Call (02) 9538 7444
Wall plate wiring being repaired with a screwdriver

The Ashfield Angle on Power Points

A big share of Ashfield's housing was never built with today's number of appliances in mind. Pre-war cottages and the post-war low-rise blocks that replaced a lot of the original stock were wired for a lighter household, not a kitchen bench of gadgets and a home office in every second bedroom.

That undersized supply shows up here as circuits that were only ever meant to run a lamp and a radio, not a laptop charger, a TV and a kettle at once. Adding points properly, on a circuit that can actually take the load, is the fix rather than another power board balanced on the skirting.

We check the circuit behind the wall before adding anything new, not just the wall itself. A point wired onto an already-stretched circuit just relocates the problem rather than solving it.

Call (02) 9538 7444
Electrician adjusting circuit breakers in a meter box

Power Points in Units and Strata Buildings

A large share of Ashfield's housing is flats, and unit power points bring their own set of quirks. Common-property circuits and individual unit boards don't always line up the way owners expect.

We work directly with owners, tenants and strata managers to sort out whose approval a job needs before it starts. Most in-unit point additions are straightforward once that's settled.

Older walk-up blocks in particular often carry the original wiring from when the building went up, so a new point sometimes needs a look at the circuit behind it first.

Call (02) 9538 7444
Electrician installing a wall power point

What Your Power Points Quote Depends On

You'll have a fixed number in hand before we start any work, agreed on paper rather than guessed at. Here's what shapes that number:

  • How many points are being added, replaced or relocated
  • Access, including whether cable needs to run through a wall cavity or roof space
  • Point type, from a standard double to USB, smart or weatherproof outlets
  • Circuit condition, if the existing wiring needs attention before a new point goes on
  • Any safety issue found, such as a circuit already running close to its limit

Quotes are always free, and your first booking with us comes with $50 off.

Wall plate wiring being repaired with a screwdriver

The Gear We Fit and Why

Point hardware isn't all built the same, and it shows over years of use rather than on day one. We fit Clipsal as our standard, because the switch mechanism inside holds up to daily use far better than a bargain-bin equivalent.

For anything with a USB port built in, we lean on the same brand for the same reason: reliable connectors that don't wear loose after a few hundred plug cycles.

Weatherproof outdoor points get IP-rated covers matched to where they're going, whether that's an exposed patio or a sheltered garage wall. It's a small detail that decides whether an outdoor point survives its first wet Sydney summer.

Call (02) 9538 7444
Electrician adjusting circuit breakers in a meter box

The Process, and What It Typically Takes

Adding or replacing power points is usually one of the quicker jobs on our books.

  1. We work out exactly what's needed and whether the circuit can carry it.
  2. You sign off on a fixed price before we isolate anything.
  3. Cable goes in and the points get fitted, kept tidy around your furniture.
  4. Every outlet is tested before we pack up and leave the space as we found it.

A single point swap often takes under an hour. Adding several new points, especially with cable runs through walls, typically takes half a day.

Electrician installing a wall power point

Standards and Paperwork, Explained Simply

Every power point goes in under AS/NZS 3000, which sets the rules for circuit loading, cable sizing and how far an outlet needs to sit from water. Laundries and bathrooms carry extra restrictions on exactly that.

On notifiable work, we lodge the compliance paperwork once the job wraps up. Hang onto it, since a buyer's solicitor or your insurer may ask for it down the track.

NSW law reserves this work for licensed electricians, outlet swaps included. A poor connection behind the wall can sit hidden for months before it becomes obvious, which is exactly why the wiring side isn't a DIY job.

Call (02) 9538 7444
Wall plate wiring being repaired with a screwdriver

Why Locals Choose Us for Power Points

It's easy to assume any outlet swap is a five-minute job, and that assumption is exactly how a loose plug or a warm faceplate keeps getting put off. We wire every point properly the first time, no matter how small the job looks.

Backing that up is our lifetime workmanship guarantee, so the labour stays covered no matter how many years pass before something needs a second look.

Electrician adjusting circuit breakers in a meter box

Related Work and Surrounding Areas

We're regularly fitting power points across Ashfield and out toward Haberfield, Croydon and Lewisham. Power point work often runs alongside lighting upgrades or a broader switchboard upgrade where the board needs the extra headroom first.

Booking two jobs in one visit usually saves a second call-out fee in time and disruption, since the same team is already on site with power isolated.

Electrician installing a wall power point

Call Us Today About Power Points

Short on outlets, or got one that's dead or dangerous? Ring (02) 9538 7444 now, or request a quote online, often same or next day and always free to ask.

Common questions

Power Points FAQs

A quick rundown of what people ask before we get started.

Do you supply the materials or can I buy my own?

Our vans carry premium hardware as the default. Bring your own point home first and we're happy to fit it, provided it checks out safe.

Can you do power points in older homes?

Constantly. Plenty of Ashfield's older stock has half the outlets a modern household needs, and bringing that up to scratch is bread-and-butter work for us.

Do you offer power points in Ashfield on weekends?

Monday to Friday covers our normal bookings. Something urgent on a weekend gets routed to our after-hours line instead.

What warranty comes with power points?

Our labour is guaranteed for life, and the hardware carries an extra 12 months over whatever the manufacturer already offers.

How do I prepare for the job?

A clear path to the wall we're working on is really all we need. Everything else, including protecting your floors, is on us.

Can power points be done without turning off power all day?

In most cases, yes. Power drops out on the single circuit involved, and every other room keeps running normally.

Call Now